Cleaning The Protective Ir Filter Glass - Creo Valeo 17Wi Installation Manual

Importance of the Protective IR Filter Glass

Cleaning the Protective IR Filter Glass

Remove any condensation that may be inside the ionized nitrogen
1.
sprayer nozzle.
Spray the protective IR filter glass with ionized nitrogen to remove
2.
large dust particles.
Fold a cleaning wipe to fit the width of the protective IR filter glass
3.
(see image sequence). Hold the wipe with tweezers.
1
3
Preparing a cleaning wipe for soaking
Soak the cleaning wipe in isopropyl alcohol, making sure it is
4.
sufficiently damp but not dripping.
WARNING:
Do not touch any part of the cleaning wipe that will come in contact with
the protective IR filter glass.
Do not use a dry cleaning wipe. It can cause ESD damage to the sensor.
Clean the protective IR filter with the cleaning wipe, using a single
5.
motion from right to left.
2
4
91