38
Connecting the Cables
Connecting the Camera-to-Back Sync Cable
Note:
This section is for users of Hasselblad 553ELX, 503CW + winder, and 503EL-M
cameras only. The Horseman DigiFlex II camera does not require the Camera-to-
Back Sync cable.
Insert one end of the Camera-to-Back Sync cable into the Hasselblad
1.
Lens Flash jack.
Insert the other end of the cable into the Camera-to-Back Sync jack
2.
on the Leaf digital camera back.
Connecting Camera-to-Back Sync cable to Leaf Valeo digital camera back
Connecting the Flash Sync Cable
Connect the Flash Sync cable to the Flash Sync jack on the Leaf digital
camera back.
Connecting Flash Sync cable to Leaf Valeo digital camera back
Chapter 6 – Hasselblad (500 Series)/ Horseman DigiFlex II