Attaching The Leaf Digital Camera Back To The Camera Body - Creo Valeo 17Wi Installation Manual

36

Attaching the Leaf Digital Camera Back to the Camera Body

Mount the Hasselblad or Horseman DigiFlex II camera on a tripod.
1.
Remove the protective cover plate from the Leaf digital camera back.
2.
Connect the Leaf digital camera back to the camera body in either
3.
portrait or landscape orientation. Rest the Leaf digital camera back on
the lower supports making sure that the lugs are properly engaged in
the recesses.
Note: The Horseman DigiFlex II supports landscape orientation only.
Move the digital back toward the camera body and check that the
4.
upper support hooks on the camera fit into the slots on the Leaf
digital camera back, and lock it into place.
Connecting Leaf digital camera back to camera body
Chapter 6 – Hasselblad (500 Series)/ Horseman DigiFlex II