Connecting The Firewire Cable; Removing The Leaf Digital Camera Back From The Camera Body - Creo Valeo 17Wi Installation Manual

Installation Procedures

Removing the Leaf Digital Camera Back from the Camera Body

Connecting Flash Sync cable to Leaf Valeo digital camera back

Connecting the FireWire Cable

For information about connecting the FireWire cable, see Chapter 2,
Connecting the FireWire Cable.
Place the camera on a solid, steady surface.
1.
If any of the following cables are connected, disconnect them:
2.
•
FireWire cable
•
Camera-to-Back Sync cable
•
Flash Sync cable
Slide the Release button to the right side.
3.
63