Removing The Leaf Digital Camera Back From The Camera Body - Creo Valeo 17Wi Installation Manual

52

Removing the Leaf Digital Camera Back From the Camera Body

Connecting the Flash Sync Cable
Note: The Leaf Valeo digital camera back together with the Flash Sync cable is
only suitable for use with external flash or strobe lighting.
Connect the flash sync cable to the Flash Sync connector on the Leaf
digital camera back.
Connecting Flash Sync cable to Leaf digital camera back
Connecting the FireWire Cable
For information about connecting the FireWire cable, see Chapter 2,
Connecting the FireWire Cable.
Place the camera on a steady, flat surface.
1.
If any of the following cables are connected, disconnect them:
2.
•
FireWire cable
•
Camera Control cable
•
Camera-to-Back Sync cable
•
Flash Sync cable
Slide the Release button to the right side.
3.
Chapter 7 – Mamiya RZ67