Using The Tripod U-Adaptor - Creo Valeo 17Wi Installation Manual

Using the Tripod U-adaptor

Using the Tripod U-adaptor

With the Tripod U-adaptor you can mount the camera body and the Leaf
Digital Magazine on a tripod. Before mounting, the camera adaptor must
be attached to the camera body (see page 77).
To mount on the tripod:
Attach the Tripod U-adaptor to the tripod.
1.
Make sure the locking lever (see 1 in Figure ) on the side of the Tripod
2.
U-adaptor is in the Open position.
Insert the camera into the Tripod U-adaptor so that the hooks on the
3.
sides of the camera adaptor fit into the slots of the Tripod U-adaptor
(see 2 in Mounting camera with Leaf Digital Magazine on tripod on
page 84).
Push the camera until it locks into place, and secure the camera into
4.
place by moving the locking lever (see 1 in Figure ) clockwise into the
Locked position.
To remove from the tripod:
Open the locking lever on the side of the Tripod U-adaptor (see 1 in
1.
the illustration Mounting camera with Leaf Digital Magazine on tripod
on page 84).
Slide the safety lever (see 3 in the illustration Mounting camera with
2.
Leaf Digital Magazine on tripod on page 84) to the left and hold it.
Remove the camera from the Tripod U-adaptor.
3.
83