Device power-up delay
Mass Storage Devices
3.6.3
Chipset
30 sec
40 sec
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
Auto[Default]
Manual
uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken form Hub descriptor.
Mass storage device emulation type. 'AUTO'
Auto[Default]
Floppy
enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
Forced FDD
Hard Disk
drives with no media will be emulated according
CD-ROM
to a drive type.
User's Manual
EMX-Q170KP User's Manual 57