Kodak Scan Station 100 User Manual page 45

Kodak scan station 100: user guide

Hide thumbs Also See for Scan Station 100:

Table of Contents

2-32

The user interface screen will change, showing additional icons at

the top of the Destination mode screen. These icons have a small

human figure on them, indicating they are your personal

destinations.

3. Load your document(s).

4. Select additional destinations or if your pre-selected destinations

are okay, press the Go/Scan button. The Destination Review screen

will be displayed.

For a quick review of the settings you will use to send these

documents, select the Output button on the lower left-hand corner

of the Destination Review screen; however, if you press any button

on the screen or control panel (including the scroll arrows) the timer

will stop and you will need to press the Go/Scan button again.

NOTE: If your Scan Station is configured for FAST Scanning,

scanning will start immediately and the Settings Review

screen will not be displayed.

A-61544 July 2008

Table of Contents

Need help?

Do you have a question about the Scan Station 100 and is the answer not in the manual?