Starting Smart Touch - Kodak i1405 Software Manual

Starting Smart Touch

2
Smart Touch runs from the system tray. After the software drivers and
scanner are properly installed, Smart Touch is started and a Scanner
icon will be displayed on the system tray.
Ready
Not Ready
Launching from the scanner:
• Press the Scroll button to go through the function numbers and
select the desired function, then press the Start button. The task
associated with the selected function number will be run.
NOTE: The Scroll and Start buttons are located on the front of the
scanner.
Kodak i1200/i1300 Series Scanners
Launching from the Smart Touch function listing:
• Click the Scanner icon to display the function listing and select the
function number you want to run.
Scroll
Start
Kodak i4000 Series Scanner
A-61629 October 2009
Scroll
Start