Kodak i1405 Software Manual page 11

10
4. Select the desired destination from the Destination drop-down list.
NOTE: If you select Printer/Fax Printer as your destination, the Scan
To: File type options are not available. Instead you have the
option of selecting a different printer than the default.
5. Select the desired file type from the File Type drop-down list. This
determines the file type of the electronic file to be created.
6. If you want to edit the images before saving, emailing or printing,
check the Edit images prior to sending option.
7. By default your documents will be stored in your "My Documents"
folder. If you want to change the location, enter the folder name or
click Browse to select a different folder.
8. If desired, add a file name prefix by entering the text in the File
name prefix field.
9. If you want to provide your own file name, select the Name file prior
to saving checkbox on the Configuration window.
10. If desired, select a different scanner Settings Shortcut based on the
type of document you are scanning, by selecting Settings. When
you click Settings, the TWAIN Datasource is launched and the
main Kodak Scanner window is displayed.
NOTE: Detailed information about the TWAIN Datasource can be
found in the Image Processing Guide located on the
installation CD.
11. If you want to change your scanner Settings Shortcut before
scanning, check Display settings prior to scanning from the
Smart Touch Configuration window.
12. Click Apply.
13. Modify other function numbers by repeating Steps 3 - 12.
14. When finished, click OK.
A-61629 October 2009