Table of Contents
Advertisement
2.5
Networking Page
The Network Settings page allows the administrator to configure the device with a static IP
address or configure using DHCP. Device is default DHCP and IP address will be indicated on the
display during boot up. See Figure 5 below.
Figure 5
•
IP Address – Enter static IP address for the gateway, default is 192.168.0.240.
•
Subnet Mask – Enter the Subnet Mask for the gateway.
•
Default Gateway – Enter the Default Gateway for the gateway.
•
DNS Server 1 – Enter the IP address of the primary DNS server if DNS will be utilized.
•
DNS Server 2 – Enter the IP address of the secondary DNS server if DNS will be utilized.
•
NTP Server – Enter the IP address of the desired NTP server. If field left blank device will not
send NTP requests
•
DSCP/QoS – Select either Default Forwarding or Expedited Forwarding from the drop down.
Selecting Expedited Forwarding will tag RTP packets with DSCP bits 46 (EF). RTP packets
are not tagged if Default Forwarding is selected.
Forwarding.
•
Audible IP Address – Enabling this allow the device to announce it IP address during boot up.
When finished entering IP information click the Save Configuration & Reload button at bottom of
screen. Once finished with the reload, click the Reboot button.
Rebooting is required after making device IP address changes.
CS-64 Administration and Set Up Guide
Device is set from factory to Default
Page 10
Essential Trading Systems Corp.
Advertisement
Table of Contents
