Table of Contents
Advertisement
2.11
Diagnostics Page
The Diagnostics page has been provided to allow an administrator access to troubleshooting tools
such as Activity Log. This tool will be useful in providing ETC information specific to the device to
aid in diagnosing problems. See Figure 11.
Figure 11
•
Config File Download – Allows the administrator to down load the devices current configuration
to a .conf file which can be read by any text editing application.
•
Browse – Allows administrator to find and select CS-64 configuration file for upload.
•
Config File Upload – Initiates uploading of the selected configuration file.
•
Log Level – Sets the logging level for the device. Level 6 collects the most data & level 1 the
least. ETC recommends leaving log level set to 6 for diagnostic purposes.
•
Clear Log File – This button clears data in log file to allow for clean data capture.
•
Log File Download – Clicking this button will down load the Log file to destination of choice.
The file downloaded is .conf which can be read by any text editing application.
•
Packet Capture – Clicking this checkbox will start a packet capture on the device. A pop up will
indicate "uncheck box to stop packet capture". When packet capture is stopped a pop up will
indicate "Press Download PCAP file button" to download the packet capture to your PC.
•
Download PCAP File – Press this button to download the PCAP file after packet capture is
complete.
CS-64 Administration and Set Up Guide
Page 18
Essential Trading Systems Corp.
Advertisement
Table of Contents
