Table of Contents Product Overview ............................5 Product Description ..........................5 Product features ............................5 Administration ............................... 6 Login ................................6 System Settings ............................7 Menu Options ............................8 System Information Page ........................9 Networking Page........................... 10 Multicast Configuration Page ......................11 Unicast Configuration Page ........................
Page 3
Release notes: 4/1/2021 Ver 2.1.34 Adds EIA Tone feature 12/11/2020 Ver 2.1.28 Fixes issue with slow volume adjust (requires Atmel IC firmware upgrade to be effective), Fixes audio bleed through issue, fixes log file download bug 5/9/2020 Ver 2.1.21 Fixes bug related to Privacy mode while operating in Unicast 3/16/20 Ver 2.1.17 Introduce new features: DTMF Steering, check boxes for RTP &...
Page 4
3/18/15 Ver 1.1.3 Improvements to code structure, add microphone limiter circuitry. 11/24/14 Ver 1.1.2 Patch “shellshock bash” vulnerability, improvements to audio quality, improvements to volume adjust controls, add Listen Only feature to channels, remove half duplex mode, fix various other bugs. 9/22/14 Ver 1.1.1 Fixed numerous bugs discovered in 1.1.0...
For listen only models this option is removed. • Built In Mics – The CS-64-F has been equipped with microphones built in to the enclosure specifically for use with the Hands Free feature. CS-64 Administration and Set Up Guide Page 5 Essential Trading Systems Corp.
IP address via DHCP. This address will be indicated on the device’s display during boot up. ETC recommends using Chrome or Firefox to ensure best browsing experience. IE9 and above can be used as well.
System Settings After logging in, you are brought to the System Information page where administrative functions of the CS-64 are presented as tabs across the top of the window. See Figure 2. Figure 2 CS-64 Administration and Set Up Guide Page 7 Essential Trading Systems Corp.
Menu Options The menu selections are displayed as tabs across the top of the web page. Each section will be explained in detail, later in the guide. Figure 3 shows the options available. Figure 3 • System Information – This page displays device information and admin definable fields for device name and login credentials.
The System Information page displays pertinent information about the device such as IP address, serial number, firmware version etc. Additionally there are fields the administrator may use to identify the specific device and change the device login credentials for security purposes. See Figure 4 below.
Networking Page The Network Settings page allows the administrator to configure the device with a static IP address or configure using DHCP. Device is default DHCP and IP address will be indicated on the display during boot up. See Figure 5 below. Figure 5 •...
• Ports – This field allows the administrator to assign ports associated with each channels multicast address. Note: ETC highly recommends using different and even number ports for each of the multicast channels. This ensures compatibility with other 3 party VoIP applications.
Unicast Configuration Page The Unicast Configuration tab allows the administrator to configure the respective channels with unicast address & port info. If unicast is enabled, multicast is disabled. See Figure 7. *Please note. Enabling Unicast mode disables Multicast operation. Figure 7 •...
Page 13
LMR / EIA Tone Settings The LMR Settings page allows the administrator to enable and configure Land Mobile Radio EIA tones for each channel of the CS-64 Figure 9 • EIA Tone Remote Enable – Checking this box enables the EIA Tone Remote feature within the CS-64.
Handsfree Timeout – This setting allows an administrator to set a time limit, in minutes, the hands free mode will stay on if a user forgets to turn it off after use. ETC recommends setting this for 10-15 minutes. Device default is 10 minutes, max is 60 minutes.
Page 15
function to select the channel user will transmit on, the footswitch must then be pressed to enable PTT on the selected channel. • PTT Mutes Speaker – If this box is checked the speaker will be muted when PTT is pressed on any channel.
• Enable HTTP – Unchecking this option allows secure (https) browsing only to the device for configuration. ETC utilizes a self-signed certificate for secure browsing. This feature is factory set to enable. Note: Syslog message definitions are provided in appendix 4.2 of this guide.
The Update Firmware page allows an administrator to easily & quickly update firmware on a device. From time to time ETC will send out firmware releases to fix bugs or add features. Simply click the browse button and navigate to where the firmware file has been saved then click Update Firmware.
Diagnostics Page The Diagnostics page has been provided to allow an administrator access to troubleshooting tools such as Activity Log. This tool will be useful in providing ETC information specific to the device to aid in diagnosing problems. See Figure 11.
Frequently Asked Questions Q: What is the IP address of device? A: When the device boots up the IP, Mask , Gateway and MAC address are presented briefly on the display. You can also press button 1 & 4 at the same time and IP address will be displayed on the device. Q: The device is not powering up? A: If you are using a POE switch, make sure the patch cord is seated securely in the jack to power up the device.
4.0 Appendix Specifications Media Channels • • Bandwidth - supports codecs: G.711 80 kbps, G.729 (4) Multicast or unicast channels 20kbps. • RTP, UDP Call Types • Linux OS, • Multicast IP broadcast • Audio Latency – Less than 50 ms •...
Page 21
Syslog Messages Below is a list of generic Syslog messages the CS-64 can produce which can be used with a customer provided Syslog Server. The messages have been classified into 2 categories; Critical & Verbose. Verbose - "Device type is " Verbose - "RTPD started"...
Page 23
(2) to refund the price paid, provided that the hardware is returned to the point of purchase or such other place as ETC may direct with a copy of the sales receipt or dated itemized receipt.