ETC CS-64-F Administration & Setup Manual page 13

2.8 LMR / EIA Tone Settings
The LMR Settings page allows the administrator to enable and configure Land Mobile Radio EIA
tones for each channel of the CS-64
Figure 9
• EIA Tone Remote Enable – Checking this box enables the EIA Tone Remote feature within the
CS-64.
• PTT Active 2175 Hz – The user definable filed just to the right allows the administrator to set
the duration, in milliseconds, of the initial PTT tone. Anytime PTT on a CS-64 is pressed the
device will send a 2175Hz tone at 0dB for the duration specified.
• Channel 1-4 F1-F17 – The fields next to each Fx allows the administrator to set a 4 character
name for each of the EIA tone frequencies. These 4 character names will be displayed on the
respective channels of the CS-64. The user will press and release the F1 button then press
the respective channel PTT button to scroll through any configured tones then press and
release the F1 button again to set. When the user presses the PTT button the device will send
the respective Tone to the radio system.
The following table is a quick reference of the respective tones:
CS-64 Administration and Set Up Guide Page 13 Essential Trading Systems Corp.