Table of Contents
Advertisement
2.6
Multicast Configuration Page
The Multicast Configuration page allows an administrator to configure the respective channels with
multicast address & port info. See Figure 6 below.
Figure 6
•
Group 1-4 Address – Allows the administrator to enter multicast addresses for the respective
channels 1-4. It is highly recommended to utilize different multicast addresses for each of the
respective channels though not required.
•
Ports – This field allows the administrator to assign ports associated with each channels
multicast address. Note: ETC highly recommends using different and even number ports for
each of the multicast channels.
applications.
•
Group Name – This field allows the administrator to assign a name to each respective channel.
This channel identifier will also be presented to the end user on the device display. It is
recommended to use uppercase letters and allows a maximum of 4 characters per channel.
•
Tx Codec – This field allows the administrator to assign the CODEC to be used by each
channel. Selections are: PCMU (G.711 uLaw), PCMA (G.711 ALaw) & G.729 as seen in the
drop down in Figure 6 above.
•
Listen Only – Allows the administrator to select channels for listen only mode should this
feature be desired.
CS-64 Administration and Set Up Guide
This ensures compatibility with other 3
Page 11
rd
Essential Trading Systems Corp.
party VoIP
Advertisement
Table of Contents
