Networking Page - ETC CS-64 Administration & Setup Manual

2.5

Networking Page

The Network Settings page allows the administrator to configure the device with a static IP
address or configure using DHCP. Device is default DHCP and IP address will be indicated on the
display during boot up. See Figure 5 below.
Figure 5
IP Address – Enter static IP address for the gateway, default is 192.168.0.240.
•
Subnet Mask – Enter the Subnet Mask for the gateway.
•
Default Gateway – Enter the Default Gateway for the gateway.
•
DNS Server 1 – Enter the IP address of the primary DNS server if DNS will be utilized.
•
DNS Server 2 – Enter the IP address of the secondary DNS server if DNS will be utilized.
•
When finished entering IP information click the Save Configuration & Reload button at bottom of
screen. Once finished with the reload, click the Reboot button. Rebooting is only necessary after
making device IP address changes.
CS-64 Administration and Set Up Guide Page 8 Essential Trading Systems Corp.