[Signal Search]; [Back Color]; [P-Timer]; [Default Logo] - Panasonic PT-TMZ400 Operating Instructions Manual

[AUTO]

[BUTTON]

[SIGNAL SEARCH]

Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the <AUTO SETUP> button is pressed when the currently
selected input has no signal, it automatically switches to the input with input signal.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[BLUE]

[BLACK]

[DEFAULT LOGO]

[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the Website (https://
panasonic.net/cns/projector/).

[P-TIMER]

Set and operate the presentation timer function.
Setting the mode
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Setting the countdown timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
80 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Enables the input detection function.
Disables the input detection function.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].