Kodak Digital Science DC50 Zoom User Manual page 72

Picture Is Not Clear
The lens is dirty.
The subject or the camera
moved before the picture
was taken.
The subject is too close.
The subject is too far away
for the flash to be effective.
The flash should have been
used but it did not go off.
The exposure is not
appropriate for the lighting.
Part of a Picture Is Missing
Something was in front of
the lens when the picture
was taken.
68
Cause
Cause
Solution
Clean the lens as described in the
Maintenance section.
Hold the camera steady until after
you hear the shutter click.
Move so the subject is at least
2.3 feet (70 cm) away.
Move so the subject is less than
9 feet (270 cm) away.
Turn on the flash.
Adjust the exposure as described in
the Camera Features section.
Solution
Make sure that your hands, fingers,
or other objects are not in front of the
lens or the flash.
January 1996