Kodak Digital Science DC50 Zoom User Manual page 36

Flash Off
The flash is not used even if the existing light is dim.
To turn off the flash:
1. Press the MODE button until the Flash icon flashes.
2. Press the SELECT button until the Flash Off icon appears in the LCD.
Flash On (Fill Flash)
The flash is used for all pictures, even if the existing light is bright. For
example, if the primary source of light is behind your subject, you may
want to change the flash setting to Flash On.
To turn on the flash:
1. Press the MODE button until the Flash icon flashes.
2. Press the SELECT button until the Flash On icon appears in the LCD.
32
January 1996