Macintosh Systems - Kodak Digital Science DC50 Zoom User Manual

MACINTOSH Systems

You can connect the DC50 zoom camera to a serial port on your
Macintosh computer.
IMPORTANT: Use only the cable that is provided with the
1. Push the sliding cover closed.
The camera is off.
2. Plug one end of the Macintosh cable into the modem port or printer
port on the back of your Macintosh computer.
NOTE: If both ports are in use, disconnect the cable from one of
3. Lift the rubber tab located on the left side of the camera.
60
DC50 zoom camera.
the ports and connect the camera cable. Make sure that the
cable is correctly oriented. Refer to your computer manuals
for information about the ports on your computer.
January 1996