Kodak Digital Science DC50 Zoom User Manual page 39

No Wait
To take pictures immediately, do not make any changes to the timer
feature. The camera takes the picture as soon as the shutter button is
pressed. "No wait" is the default timer setting.
Ten Seconds
With this timer setting, the camera waits ten seconds after the shutter
button is pressed before it takes the picture. When the shutter button is
pressed with "timer on," the timer icon flashes slowly for 10 seconds.
The red light on the front of the camera illuminates for eight seconds,
flashes slowly for two seconds, and then the camera takes the picture.
Setting the Timer
1. Press the MODE button until the Timer icon flashes.
2. Press the SELECT button until the Timer icon flashes quickly.
3. Press the shutter button twice.
The timer is set. The green light to the right of the viewfinder lights
up. The picture will be taken automatically approximately 10 seconds
after the shutter button is pressed the second time.
The timer is off after the picture has been taken.
January 1996
35