Kodak Digital Science DC50 Zoom User Manual page 47

Continuing the Copy Operation
During a copy operation, if the memory card becomes full, "FUL"
appears and flashes in the Images Remaining Counter. You can
continue copying after you insert another memory card or cancel the
rest of the copy operation. If you specify any other operation, an error
code may appear in the LCD.
1. Eject and remove the memory card from the camera.
2. Insert a new memory card in the camera.
3. Press the SELECT button.
The copy operation continues. When all of the pictures in the
camera's internal memory have been copied, the Copy Images
icon disappears from the LCD, the Memory Card icon and the
Images Taken and Images Remaining Counters stops flashing.
The Images Taken Counter indicates the number of images taken
on the memory card.
NOTE: You cannot stop the copy operation during the time it is
The copy operation will be canceled in the following cases:
– An incompatible memory card is inserted into the camera.
– The camera goes into the power save mode before you can press
the SELECT button.
All button presses during a copy operation are ignored. The copy
operation may become corrupted if not enough power is available.
January 1996
copying images to a memory card. You can only stop
a copy operation after it has paused to allow you to
insert another memory card.
43