Replacing The Palm Rest - Dell Inspiron 1420 Service Manual

1 palm rest
8. Disconnect the touch pad cable.
Use a plastic scribe to release the locking clips on both sides of the system board connector, and then gently pull to disconnect the touch pad connector
from the system board connector.
9. Disconnect the LED board cable.
1 touch pad cable
10. Moving from left to right, carefully lift the palm rest along the rear edge, near the hinge brackets, then rotate the palm rest forward to remove it from the
computer.
Replacing the Palm Rest
CAUTION:
NOTICE:
surface, such as the back panel on the computer.
1. Follow the instructions in
2. Follow the instructions in
Great user manuals database on
2 M2.5 x 5mm screws (3)
2 palm rest
Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You Begin
Removing the Palm Rest.
UserManuals.info
3 Bottom of the system
3 LED board cable