Introduction; Notes On Safety; Manual Markings - Quansys Q-View IMAGER LS Operator's Manual

04

Introduction

The Q-View™ Imager LS is designed to acquire
high quality images of chemiluminescent 96-well
microtiter plates. It is intended for research use only.
Q-View Software is intended to be used to control the
instrument and for the analysis of data produced by
the Q-View Imager LS.

Notes on Safety

The Q-View Imager LS has been designed and
certified to meet EN61010-1 requirements, which are
internationally accepted electrical safety standards.
Certified products are safe to use when operated in
accordance with the device instruction manual. It is
critical that the user read this manual in its entirety
and train on the device frequently to ensure proper
operation. For laboratory use only, Pollution Degree
2 or better. Recommended for use below 2000 m. If
the device is used outside of the instructions herein
or modified, dissembled, or altered, the safety of the
device cannot be guaranteed. Improper operation
may:
1. Void the manufacturer's warranty
2. Void the regulatory certification
3. Create a potential safety hazard

Manual Markings

Indicates a warning: Warnings help prevent safety
issues or failures in performance.
Indicates an important notification: Important
notifications alert the user to certain steps that are
critical for optimal performance.
For Research Use Only