Table of Contents
Advertisement
3.
If you have no n
to hear main menu press 1". If you do not press 1 within 8 seconds, the
machine hangs up.
When you press 1, you will hear the main menu.
Simply follow the instructions as announced:
"To play all messages press 2".
"To play new messages press 3".
"To skip back during messages press 4".
"To delete during messages press 5".
"To skip forward during messages press 6".
"To set answer on or off press 7".
"To hear the outgoing message menu press 8".
"To set a new security code press 9".
"To hear main menu again press 1".
When the last message is played you will hear, "End of messages".
2.
Set the security PIN code
Using the handset:
1.
Press
Menu/OK/Secrecy, scroll Down to « TAM SETTINGS » and press
Menu/OK/Secrecy.
2.
Scroll
Down to « REMOTE CODE » and press Menu/OK/Secrecy. The
handset will display the current code.
3.
Enter a new code and then press
3.
Check security code
1.
Press
Del at the base. The security code is announced.
XI.
Help
Most problems are caused by the telephone and mains power cables being
incorrectly connected, not connected at all, or by the power being turned off.
If you are experiencing a problem with your Pyramid, check the following:
.
That the mains power supply is correctly connected at both the base and at
any chargers, and that the power is switched on at the wall socket.
.
That the telephone line cord is correctly connected.
.
That the handset batteries are installed correctly and charged.
ew messages, you will hear, "You have no new messages,
Menu/OK/Secrecy to confirm.
37
Advertisement
Table of Contents
