3. diGit dEtECt is displayed. Press
4. Enter the number you want to be detected and press
5. Scroll to PREFiX and press
6. Enter the number you want it replaced with.
OK
7. Press
to confirm or
9.4
Recall time
This setting is useful to access certain network and PABX/switchboard services.
The default recall time is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1. Press
, scroll
2. Scroll
to « RECALL tiME », press
3. Press
/
to select « ShORt », « MEdiUM » or « LOnG ».
OK
4. Press
to confirm or
9.5
dial mode
The default dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1. Press
, scroll
2. Scroll
to « diAL MOdE », press
3. Press
/
to select « tOnE » or « PULSE ».
OK
4. Press
to confirm or
9.6
Change base Pin code
Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default PIN is 0000. The PIN can be changed to a preferred
number.
When entering a PIN, the digits are shown as ****.
1. Press
, scroll
2. Scroll
to « Pin COdE » and press
3. Enter a new 4 digit PIN and press
4. Re-enter the new PIN.
OK
5. Press
to confirm or
IMPORTANT
If the PIN code is changed, please keep a record of the new number.
OK
OK
.
to return to standby.
to « AdVAnCEd SEt » and press
to return to the previous menu.
to « AdVAnCEd SEt » and press
OK
to return to the previous menu.
to « AdVAnCEd SEt » and press
OK
to return to the previous menu.
.
OK
OK
OK
.
OK
.
OK
OK
.
.
17
.
.
.
.