Connecting The Internal Drive Interface And Dc Power Cables - Quantum LTO-3 Quick Start Manual

Product Name Quick Start Guide
Figure 5 Internal Tape Drive
Mounting Hole Locations
Connecting the Internal
Drive Interface and DC
Power Cables
Figure 6 Internal SCSI Drive
Interface and DC Power
Connectors
8
As shown in figure 6 and figure
Height Tape Drives have connectors for:
• Either a 68-pin parallel SCSI or a 29-pin SFF-8482serial-attached SCSI (SAS) interface
cable
• A serial library interface cable
• The internal drive DC power cable
68-pin SCSI cable
Upper mounting holes
Lower mounting holes
7, the rear panels of the internal LTO-3 (Model B) Half-
DC power connector
Installing the Internal LTO-3 (Model B) Half-Height Tape Drive