Installing The Lto Driver Software; Registering The Lto-3 (Model B) Half-Height Tape Drive; Safety Compliances - Quantum LTO-3 Quick Start Manual

Installing the LTO Driver Software

Registering the LTO-3 (Model B) Half-Height Tape Drive

Safety Compliances

Installing the LTO Driver Software
Note: The LTO-3 (Model B) tape drive can ONLY be used with the LTO-3 (Model B)
drivers and firmware. To obtain the correct driver and firmware, visit
www.quantum.com/ServiceandSupport/Index.aspx.
If you intend to use the LTO-3 (Model B) Half-Height Tape Drive with the Microsoft
native backup applet on a Windows 2000, Windows Server
Windows Vista operating system, install the appropriate version of the LTO driver
software. (See the Downloads page for LTO-3 (Model B) drivers under Standalone Tape
Drives on the Quantum support website at: www.quantum.com/support.)
Note: The LTO driver software is not necessary with commercial backup application
software.
After installing the LTO-3 (Model B) Half-Height Tape Drive, be sure to register it via the
Quantum website at:
www.quantum.com/registration
Registering the drive ensures that you will receive the latest technical information about
the drive, as well as other product, service, and support information.
The LTO-3 (Model B) Half-Height Tape Drives are safety compliant with the following
regulatory organizations and codes in the countries indicated:
Country Regulatory Organization
Canada Canadian Standards Association
(CSA)
EU member nations Comité Europèen de Normalisation
Electrotechnique – the European
Committee for Electrotechnical
Standardization (CENELEC)
Product Line
http://
®
® ®
2003, Windows XP , or
Compliant to:
UL/CSA 60950-1
EN 60950-1, 1st
edition
15