Panasonic MINAS-BL GV Series Manual page 36

DIN rail mounting unit
Optional part number
V 11
Part where DIN
rail is mounted
With rail stop
pushed in
DIN rail
Hook the upper side of DIN rail
mounting part on the DIN rail.
With the rail stop released, pull out
the lower part of the amplifier to
the near side.
W 1 W
35
2-M4, bar ring
20
(for mounting)
Mounting plate
Rail stopper
Press
lightly.
Ensure that the rail stop
has been pushed in.
Press lightly the lower part of
the main body of amplifier.
Pull out the lower part
of the amplifier to the
near side.
(6)
(6)
[Unit: mm]
Amplifier mounted to DIN rail
By lifting the amplifier, you can remove it
from the DIN rail.