Installing The Software; Stampcreator P-Touch Editor, Stampcreator Express And Printer Driver - Brother Stampcreator PRO SC-2000USB Operation Manual

Stampcreator P-touch Editor, Stampcreator Express and printer driver

Before stamps can be engraved on the SC-2000USB, the stamp-editing tool Stampcreator P-touch Editor software, Stampcreator
Express software and the SC-2000USB printer driver must be installed.
Follow the procedure described below to install the software onto the computer.
NOTE: You must have administrator privileges in order to install the software on a
computer running Windows
1 Connect the SC-2000USB to the computer's USB or serial port, and then turn on only the computer.
2 Insert the SC-2000USB Applications & Drivers CD-ROM into the
computer's CD-ROM drive. A dialog box appears, allowing you to select
which components to install. Click the Standard Installation button.
The InstallShield ® Wizard for installing the software starts up.
If the dialog box does not appear automatically, go to "My Computer
(Computer)", double-click the CD-ROM icon, and then double-click
"Setup.exe".
For Windows Vista ®
When the Auto Play dialog box appears, click "Run Setup.exe".
3 When the License Agreement dialog box appears, please read the li-
cense agreement carefully.
If you accept all terms of the preceding license agreement, click the Yes
button to continue.
4 In the Customer Information dialog box, type the necessary information
into the appropriate boxes, and then click the Next button.
If the information has already been registered in Windows
pear in the appropriate boxes.
5 In the Choose Destination Location dialog box, if it is OK to install the
Stampcreator P-touch Editor software into the folder shown in the "Des-
tination Folder" box, click the Next button.
6 In the Add shortcut dialog box, specify where to add shortcuts for
Stampcreator P-touch Editor, and then click the Next button.

Installing the Software

®
and Windows ® 7 users only
XP, Windows Vista ® or Windows
®
, it will ap-
SET UP
® 7.
7