Installing The Printer Driver And The Software; Before You Begin (Connecting The Printer Using A Wireless Network) - Brother RuggedJet RJ3150Z1 Online User's Manual

Setting Up the Printer

Installing the Printer Driver and the Software

To print from your computer, you must install P-touch Editor, the printer driver, and other applications to your
computer.
1 Visit our website (http://www.brother.com/inst/) and download the installer for the software and
documents.
2 Double-click the downloaded .exe file and follow the on-screen instructions to proceed with the installation.
In the dialog box for selecting which items to install, select the necessary software.

Before You Begin (Connecting the Printer Using a Wireless Network)

First you must configure the wireless network settings of your printer to communicate with your network
access point/router. After the printer is configured to communicate with your access point/router, computers
on your network will have access to the printer. To use the printer from these computers, you will need to
install the drivers and software.
Important
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must know your wireless network settings before you proceed with
this installation.
• If you have previously configured the printer's wireless settings, you must reset the network settings before
you can configure the wireless settings again.
For RJ-3050
1 Press and hold the
2 Press and hold the
Wi-Fi and Bluetooth indicators start blinking (POWER: in orange; Wi-Fi and Bluetooth: in blue).
3 While pressing the
4 Release the (Power) button.
For RJ-3150
1 Press the [Menu], [ ], or [ ] button to select the [Administration] menu, and then press the [OK]
button. (The default password is "1111".)
2 Select [Reset] > [Network Reset] > [Reset] using [ ] or [ ], and then press the [OK] button.
Note
To achieve optimum results with normal everyday document printing, use the printer as close to the
network access point/router as possible with minimal obstructions. Large objects and walls between the
two devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
(Power) button to turn the printer off.
(Feed) button and the
(Power) button, press the
(Power) button for about 3 seconds. The POWER,
(Feed) button once.
1
1
1
21