Table of Contents
Advertisement
• Press Zero. The display will show "-0.0-" when the meter is zeroed and ready for measurement.
• Remove the cuvette.
POWDER REAGENT PROCEDURE
• Add the content of one packet of
Chlorine Reagent. Replace the plastic stopper and the
cap. Shake gently for 20 seconds.
• Insert the cuvette into the holder and close the lid.
• Press Timer and the display will show the countdown prior to the measurement or wait 1 minute
and press Read. When the timer ends the meter will perform the reading. The instrument displays
the results in mg/L of chlorine (Cl
HI93701-0
Free
).
2
43
43
43
Advertisement
Table of Contents
