i-PRO WV-S65340-Z4 Basic Information page 14

IMPORTANT:
• When the camera is initialized, the settings including the network settings will be initialized.
Before initializing the settings, it is recommended to write down the settings in advance.
• Do not turn off the power of the camera during the process of initialization. Otherwise, it may
fail to initialize and may cause malfunction.
B LINK indicator
• When the camera is able to communicate with
the connected device
C ACT indicator
• When data is being sent via the network camera
D SD ERROR indicator
• When an error status is detected
* SD memory card error detection conditions: Write error, read error, etc.
Note:
• Lighting/blinking LED can be turned off with the software settings at any time. (The initial state
is lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation
conditions. ( Operating instructions on our product information website)
Lights orange
Blinks green (accessing)
Lights red
14