Removing The Door - GoPro HERO11 Black Manual

Mounting Your GoPro
WARNING: Always use a helmet that meets applicable safety
standards if you're using a GoPro helmet mount or strap.
Choose the right helmet for your sport or activity, and make
sure that it's the right size and fit for you. Check to see that
your helmet's in good condition, and always follow the
manufacturer's instructions on safe use.
Replace any helmet that's been subjected to a major impact.
No helmet can protect against injury in every accident.
Be safe.
USING YOUR GOPRO IN + AROUND WATER
Your GoPro is waterproof to 33ft (10m) with the door locked. You won't
need an additional housing before diving in.
The touch screen was designed to work when wet, but you may need
to wipe it off if it has trouble sensing your commands. Although it will
not work under water, you can use the camera's buttons to navigate
the menus when you're submerged.
To learn more, see Navigating With the Buttons (page 28).
PRO TIP: Use a camera tether and a Floaty (sold separately) to keep
your camera afloat in case it detaches from the mount.
To capture extreme adventures down to 196ft (60m), pick up the
Protective Housing (HERO11 Black), sold separately.
For more information on Camera Tethers, Floaty, and the Protective
Housing, visit gopro.com.
116

Removing the Door

There might be times when you need to remove your camera's door.
NOTE: Only remove the door in a dry, dust-free environment.
The camera is not waterproof when the door is open or removed.
REMOVING THE DOOR
1. Unlock the latch, and flip the door open.
2. With the door in a horizontal position, gently pull outward until it
snaps off.
WARNING: Avoid using your GoPro with the door off.
The battery could slide out during use.
117