GoPro HERO11 Black Manual page 58

Mounting Your GoPro
4. Attach the mounting buckle to the mount.
a. Flip up the mounting buckle plug.
b. Slide the buckle into the mount until it clicks into place.
c. Press the plug back down so that it sits flush with the buckle.
114
Mounting Your GoPro
USING THE ADHESIVE MOUNTS
Follow these guidelines when attaching adhesive mounts to helmets,
vehicles, and gear:
• Attach mounts at least 24 hours before you use them.
• Only attach the mounts to smooth surfaces. They won't stick
properly to porous or textured surfaces.
• Firmly press mounts into place. Be sure the adhesive is in full contact
with the surface.
• Only use on clean, dry surfaces. Wax, oil, dirt, or other debris will
weaken the bond, and you could lose your camera.
• Attach mounts in dry, room-temperature conditions. They won't stick
properly in cold or damp environments or on cold or damp surfaces.
• Check state and local regulations and laws to ensure that attaching
a camera to equipment (such as hunting gear) is permitted. Always
comply with regulations that restrict the use of consumer electronics
or cameras.
WARNING: To avoid injury, do not use a tether when mounting
your camera on a helmet. Do not mount the camera directly
on skis or snowboards.
For more information about mounts, visit gopro.com.
115