Advertisement
Quick Links
1
Download the GoPro Quik App
2
Insert SD Card
3
Connecting to Your Drone
Connect to
flight controller,
GH 1.5 3pin Connector
Max 5V
Power
Ground
5-27v
2S-6S
Shutter
Note: Please check polarity and wire configuration.
Incorrect wiring can permanently damage camera.
4
Powering On
Note: The LED will blink 3x after powering on.
5
Pairing with the App
Aim your GoPro camera lens at the QR code to begin
pairing with the GoPro Quik app on your phone.
Note: The LED will blink 2x to confirm QR has been read.
6
Finishing Pairing with the GoPro Quik App
Set up
Upload Footage
Au
while Charging
We Found
Your GoPro
Pair Camera
Later
The GoPro Quik app is the easiest way to switch
modes, adjust settings and frame your shot.
Note: Your camera must be within 1 meter of your phone to pair with the
GoPro Quik app. Auto Upload is not supported by HERO10 Black Bones.
© 2022 GoPro, Inc. All rights reserved. Model/Modelo: CPBN1
130-32240-000 REVB
Advertisement
Related Manuals for GoPro HERO 10 Black Bones
Summary of Contents for GoPro HERO 10 Black Bones
- Page 1 Note: Your camera must be within 1 meter of your phone to pair with the pairing with the GoPro Quik app on your phone. GoPro Quik app. Auto Upload is not supported by HERO10 Black Bones. Note: The LED will blink 2x to confirm QR has been read.
- Page 2 For more information and QR codes, go to gopro.com/bones LED Status Aim your GoPro camera lens at the QR code to Camera Power On 3 blinks Idle Video Mode 1 blink per 5s set up your camera up with these settings:...