Larson Davis System 824 Training Manual page 2

824 Training Manual
Copyright
Copyright 2016 by Larson Davis, Incorporated. This manual and the software described in it are copy
righted, with all rights reserved. The software may not be copied in whole or in part for commercial
use without prior written consent of Larson Davis Inc. The manual may not be copied in whole or in
part for any use without prior written consent of Larson Davis Inc.
Disclaimer
The following paragraph does not apply in any state or country where such statements are not agree-
able with local law:
Even though Larson Davis, Inc. has tested the software and reviewed its documentation, Larson Davis
Incorporated makes no warranty or representation, either expressed or implied, with respect to this
software and documentation, its quality, performance, merchantability, or fitness for a particular pur-
pose. This documentation is subject to change without notice, and should not be construed as a com-
mitment or representation by Larson•Davis Inc.
This publication may contain inaccuracies or typographical errors. Larson Davis Inc. will periodically
update the material for inclusion in new editions. Changes and improvements to the information
described in this manual may be made at any time.
Warranty
For warranty information, refer to our Terms and Conditions of Sale on our website,
www.larsondavis.com/TermsConditions.aspx.
Recycling
PCB Piezotronics, Inc. is an environmentally friendly organization and encourages our customers to be
environmentally conscious. When this product reaches its end of life, please recycle the product through
a local recycling center or return the product to:
PCB Piezotronics, Inc.
Attn: Recycling Coordinator
1681 West 820 North
Provo, Utah, USA 84601-1341
where it will be accepted for disposalis manual may be made at any time.
ii