Teknatool Nova DVR 2024 Quick Start Manual

Changes to the 2015 version:

The Nova DVR 2024 Lathe has been updated with a new keypad and interface to give the
user instant access to the preset speeds #1 - #10.

New keypad

Key
F1
F2
F3
F4
F5
Hold "Mode" + F1
Hold "Mode" + F2
Hold "Mode" + F3
Hold "Mode" + F4
Hold "Mode" + F5

Changing line in the menu

In the 2015 version of the 2024, the menu line can be changed by pressing the "Fwd / Rev"
key.
Note: Previously, the user had to hold "Fwd/Rev" and press "UP RPM" or "DOWN RPM" key
to change the line.
Nova DVR 2024 – 2015 version
Name
- Preset Speed 1 Key -
- Preset Speed 2 Key -
- Preset Speed 3 Key -
- Preset Speed 4 Key -
- Preset Speed 5 Key -
- Preset Speed 6 Key -
- Preset Speed 7 Key -
- Preset Speed 8 Key -
- Preset Speed 9 Key -
- Preset Speed 10 Key -
Short description
Set speed to "Preset speed #1"
Set speed to "Preset speed #2D"
Set speed to "Preset speed #3"
Set speed to "Preset speed #4"
Set speed to "Preset speed #5"
Set speed to "Preset speed #6"
Set speed to "Preset speed #7"
Set speed to "Preset speed #8"
Set speed to "Preset speed #9"
Set speed to "Preset speed #10"