Advertisement
Side View Camera Wiring: Each Side View Camera needs 12-volt accessory power and Chassis ground from
a clean non-painted surface. Also needs the composite video output cable ran to Video inputs on monitor. (1-
4). Can be hooked up to desired orientation on video screen. All outside connections please use supplied heat
shrink as to not VOID WARRANTY.
Front & Rear Camera wiring: Both Cameras needs 12-volt accessory power and Chassis ground from a
clean non-painted surface. Also needs the composite video output cable ran to Video inputs on monitor. (1-4).
Can be hooked up to desired orientation on video screen. All outside connections please use supplied heat
shrink as to not VOID WARRANTY.
SUTV-1040 3-12-2018
Page 12 of 12
Advertisement
