Overview; Identifying Main Components - Goodway TFC-JR Operating And Maintenance Manual

• GROUND FAULT CIRCUIT INTERRUPTER: This unit is provided with a
Ground Fault Circuit Interrupter (GFCI) built into the power cord plug to
prevent electrocution. This device provides additional protection from the
risk of electric shock. DO NOT RUN THE UNIT WITHOUT THIS DEVICE!!
If replacement of the plug or cord becomes necessary, use only identical
replacement parts that include GFCI protection.
• Do not abuse the cords. Never use the cord to carry the tool or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of
electric shock.
• WARNING: The cords, wires, and/or cables supplied with this product may
contain chemicals, including lead or lead compounds, known to the State of
California to cause cancer and birth defects or other reproductive harm. Always
wash hands thoroughly after handling the unit.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body
is grounded.
• EXTENSION CORDS: Use only extension cords that are intended for outdoor
use. These extension cords are identified by a marking "Acceptable for use with
outdoor appliances; store indoors while not in use." Use only 3-wire extension
cords that have 3-prong grounding-type plugs and 3-pole cord connectors
that accept the plug from the product. Use only extension cords having an
electrical rating not less than the rating of the product. Do not use damaged
extension cords. Always disconnect the extension cord from the receptacle
before disconnecting the product from the extension cord.

OVERVIEW

Buildup of organic slime (algae, bacteria colonies, insects and other organic
materials) together with scale, hard water deposits, sand, dirt, etc. can seriously
reduce the heat exchange efficiency of cooling towers. The cooling tower fill
should be cleaned to return the tower to optimal operational condition. The TFC-JR
is capable of applying Scalebreak®-GEL that clings to the vertical surfaces of the
tower fill. After a sufficient dwell time, the Scalebreak®-GEL breaks down the scale.
This allows the mechanical action of the oscillating turbo nozzle to rinse the tower
fill clean.

IDENTIFYING MAIN COMPONENTS

Power Switch
Light
TFC-JR 0321
Inlet Selector
5