Section 8: Connect The Water Supply - Zenith HydroTap G5 Installation Instructions Manual

Valves and fittings must be sealed with PTFE
!
tape if compression seals are not included.
Note Mixer tap installations also use a 'Tee piece' as part of the water supply
plumbing connections. See the Tap installation instructions supplied with the
Mixer Tap to connect the water supply if using the mixer tap option.
Note correct strainer orientation.
Isolation valve
(not supplied)

SECTION 8: Connect the water supply

Male - Female
Strainer
(supplied)
Connect together
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions
adaptor
(supplied)
Connect to
Command Centre,
see page 20
Connect to
Command Centre,
see page 20
15