Section 4: Technical Data - Zenith HydroTap G5 Installation Instructions Manual

Electricity supply requirements
220-240V 50Hz AC.
Component
Command Centre
Booster
UV-C module
Water supply pressure requirements
Component
HydroTap
Vented Mixer Tap
Booster
Limescale filter
A pressure limiting valve must be fitted for mains water pressures
!
above the maximum limits stated above in accordance with local
plumbing regulations.
Note: All models (excluding UK) have an internal pressure limiting device
to reduce the maximum mains regulated pressure (700kPa in Australia),
protecting the system against pressure surges above 500kPa.
Water supply connection
1/2" BSP (G1/2).
08 807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions

SECTION 4: Technical data

Australia, NZ
1x 220 - 240V AC 10A socket
1x 220 - 240V AC 10A socket
1x 220 - 240V AC 10A socket
Min - Max pressure, kPA (bar)
Australia, NZ
170 (1.7) - 700 (7.0)
300 (3.0) - 700 (7.0)
200 (2.0) - 700 (7.0)
200 (2.0) - 700 (7.0)
Country
1x 220 - 240V AC 13A sockets
1x 220 - 240V AC 13A sockets
1x 220 - 240V AC 13A sockets
UK
170 (1.7) - 500 (5.0)
200 (2.0) - 500 (5.0)
200 (2.0) - 500 (5.0)
200 (2.0) - 500 (5.0)
UK