Section 11: Connect The Booster - Zenith HydroTap G5 Installation Instructions Manual

Booster
!
Do not connect to electrical power until commissioning.
Do not over tighten hose connections.
Braided hoses supplied cannot be lengthened.
Cold water into Booster,
connect to Command Centre
BYPASS OUT
see page 20
Quick Start Installation Guide
18
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions

SECTION 11: Connect the Booster

!
Strainer
Booster
Hot water out of Booster,
connect to Command Centre
BYPASS IN
see page 20
3/8" BSP
connections
Hold connections
while tightening hoses
with spanner