Operation & Maintenance - Zenith HydroTap G5 Installation Instructions Manual

Operation & maintenance
Please refer to the User Guide for all operational and maintenance features of
the HydroTap. The User Guide is located in the HydroTap Command Centre
filter door.
Zenith offers a fully-inclusive HydroCare Service Plan to take care of all routine
maintenance, including filter replacements, sanitisation, electrical safety
inspections as well as general maintenance of your HydroTap. For more
information, visit our website:
New Zealand www.zenithwater.co.nz /hydrocare
The Zenith filter should be replaced as recommended on the filter label,
or earlier if you notice a persistent reduction in water flow from the tap or
an increase in chlorine, taste or odour in the water. Not changing the filter
cartridges when required may affect the water quality.
For safe operation after periods of non-use longer than 48hours, flush the
HydroTap for at least 60 seconds.
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions 29