Table of Contents
Advertisement
LQ500
Wetting materials:
Name
Main pipe
Temperature detector sheath
Applicator window
Applicator window sealant
*1 Avoid using the LQ500 for applications where harmful
liquids that cause corrosion, deterioration, or changes
in quantity for the wetting materials are used.
Make sure all materials at these wetting parts that are
suitable for your CIP or not before cleaning.
*2 The smoothness inside the pipe on this material is;
Type
Standard type
Option type
*3 State the wetted materials when you choose these
options.
*4 The materials of them are changed for abrasive
applications.
Need to choose the specification code for this
application.
Applicator:
Serves as an antenna to send and receive
microwave signals, one set provided.
Temperature detector: RTD (Pt100)
Fitting:
Direct fitting to vertical or horizontal piping.
(Refer to the section of Piping Precautions.)
4
Materials (*1)
SCS14A cast (equivalent to
316 SS) (standard) (*2, *3)
316 stainless steel (*4)
Polysulfone (*4)
Fluoric rubber
Meter size
Smoothness
50 to 200 mm
No buffing
(2" to 8")
250 & 300 mm
Buffing # 150
(10" & 12")
50 to 300 mm
Buffing # 150
(2" to 12")
Advertisement
Table of Contents
