Logic Functions - Zennio Presentia C v2 Manual

Presence detector with luminosity sensor for ceiling mounting
Hide thumbs Also See for Presentia C v2:
Table of Contents

Advertisement

Presentia C v2

2.3 LOGIC FUNCTIONS

This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other
communication objects specifically enabled for this purpose.
Presentia C v2 can implement up to 10 different and independent functions, each of
them entirely customisable and consisting of up to 4 consecutive operations.
The execution of each function can depend on a configurable condition, which will be
evaluated every time the function is triggered through specific, parameterisable
communication objects. The result after executing the operations of the function can
also be evaluated according to certain conditions and afterwards sent (or not) to the
KNX bus, which can be done every time the function is executed, periodically or only
when the result differs from the last one.
Please refer to the "Logic Functions" user manual available under the Presentia C v2
product section at the Zennio homepage (www.zennio.com) for detailed information
about the functionality and the configuration of the related parameters.
https://www.zennio.com/
Technical Support:
https://support.zennio.com/
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zpdc30lv2

Table of Contents