Advertisement
K-Kord Software
Download the operating software K-Kord from the
Software section within www.493k.com.
Fill in the requested information and click submit.
An email will be sent to you which contains a K-KORD
download link.
Run the K-KORD executable file.
By default the software looks at COMS Port 1. Ensure
that the USB converter is configured to COM Port 1. If
not, go to Windows Control Panel and re-configure the
serial-to-USB converter in the 'Hardware' section.
You will now have 35 days to enter your Product Key.
(see below on how to request this)
When the software is running, click on the 'Start
Recording' button. After ensuring that the transmitter
and receivers are communicating (signalled by a
flashing light on the transmitter) the data will now be
displayed and recorded on screen.
18
Advertisement
