Advertisement
Setting up the K-PAQ Transmitter
Ensure the unit has the battery inserted
and the plastic battery cover securely
Switch on the insulated transmitter using
the black toggle switch on the fascia lid of
the transmitter. The blue LED on the
LED
transmitter will come on and begin
flashing as soon as it pairs with the
receiving station.
If the light is solid then it is because it is
looking for the receiver. It will then turn
Switch
off after 24 seconds and sleep for over 2
minutes before waking up to look for the
receiver again.
If the transmitter LED is solid ensure that
the receiver is switched and flashing and is
within range.
13
Advertisement
