Operational Guidance - udir/c UD1201 Operating Instructions Manual

1>
Turn on the power of
1)
the transmitter, and
the red indicator light
will flash quickly.
2)
Press for 2 second to turn on the power. The lights
flash and enter the frequency matching state. Press for
2 second to turn off the power.
After the car power is turned on, the transmitter and the car will carry out automatic frequency matching. When the indicator light of the
transmitter and the car lights are always on, the frequency matching is successful. In the process of frequency matching, the car lights
will flash rapidly. At this time, the gyroscope is being calibrated automatically. Please place the car on the level ground to complete this
operation. After calibration, the car lights return to normal.
2>
Throttle trigger
Go forward

Operational guidance

Frequency matching
Manipulation method
Place the model on level ground
11
Do not touch the
throttle trigger when
turning on thepower
of the transmitter.
Consistent direction
Throttle trigger
Go backward