Operational Guidance - udir/c UD1805 Operating Instructions Manual

ESC Output
input port port
1>
OFF
Model Battery

Operational guidance

Frequency matching
ON
1) Turn on the power of the
transmitter, and the red indicator
light will flash quickly.
2) Pull out the clips, and remove
the battery hold-down.
3) Put the battery into the battery
compartment, Battery hold-down
reset clips reset and then connect
with the ESC.
11
Do not touch the throttle
trigger when turning on
thepower of the transmitter.
Consistent direction
Place the model on level ground
4) Reset the bodyshell